PreSonus Temblor T8 Active 8″ Studio Subwoofer and Cables Package

Powerful and musical, PreSonus Temblor T8 active, downward-firing studio subwoofers are designed to deliver fast and accurate transient response, extending low frequencies down to 30 Hz without a hint of "tubbiness" or overshoot. The Temblor T8 complements full-range monitors without overshadowing them, naturally extending the reach of your full-range system's low end so that you can produce your best mix from top to bottom.

Driven by a 200W (peak) power amplifier, the Temblor T8's 8-inch, glass-composite low-frequency driver delivers tight, responsive sub-bass, thanks to its lightweight and rigid cone. This design provides lower distortion than other materials for sub-bass reproduction that's as coherent and clear as your full-range monitors.

Integrating a Temblor T8 into your monitoring setup is easy using a continuously variable lowpass filter (50 Hz to 130 Hz) that allows you to create a seamless crossover transition between the full-range studio monitors and subwoofer for the most accurate listening environment possible.

Temblor T8 subwoofers provide the connections and controls necessary to act as the central hub for a basic monitoring setup. A switchable highpass filter on the full-range outputs helps avoid frequency cancellation and reinforcement in the subwoofer's upper range, while a polarity-invert function ensures your system is in phase. A momentary footswitch (included) makes it easy to compare your mix with or without sub-bass frequencies.

Versatile connectivity.

The Temblor® T8 offers versatile connectivity, including left and right balanced XLR and ¼" TRS and unbalanced RCA main inputs. Connect your full-range monitors with left and right balanced XLR or ¼" TRS outputs; a switchable highpass filter removes frequencies below 80 Hz.

Seamless system integration.

The Temblor® T8 integrates seamlessly with your full-range monitors. A variable lowpass filter sets the upper (crossover) frequency reproduced by the subwoofer. You also get an input gain control (-30 dB to +6 dB), polarity invert switch and ground-lift switch. An included momentary footswitch lets you check your mix with and without the subwoofer.

World-class recording software included.

Temblor®-series studio subwoofers come with a special edition of PreSonus® Studio One® Prime recording and production software, with the entire Studio Magic software suite enabled. Studio Magic includes over $1,000 USD worth of music software including plug-ins, loops, virtual instruments, effects and tutorials.

Features:

• 8-inch, downward-firing, glass-composite low-frequency transducer with high-density rubber surround
• Class AB amplifier: 200W peak (100W RMS) power
• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T8 outputs to the main speakers
• Power standby
• Includes Studio Magic, a suite of over $1000 USD worth of music production software

Specifications:

• Electronics
  • Voltage Requirements : 100-240 VAC, 50-60 Hz
  • Connection Type : IEC
• Measurements
  • Width : 10.2" (25.9 cm)
  • Height : 11" (27.9 cm)
  • Depth : 12.6" (32 cm)
  • Weight : 21.2 lbs. (9.6 kg)
• Hardware
  • Cabinet Material : Vinyl-Laminated, Medium-Density Fiberboard
• Monitors
  • Protections : RF Interference, Output-Current Limiting, Over-Temperature, Turn-on/off Transient, Subsonic Filter, External Mains Fuse
  • Audio Controls : Input Gain Range: -30 to +6 dBPolarity Switch: 0 degrees or 180 degreesLow Pass Filter Control: 50 Hz to 130 HzHigh Pass Filter Switch: On/Off
  • Peak SPL :
  • Monitor Inputs : 2 x Balanced 1/4" TRS, 2 x Unbalanced RCA
  • LF Transducers : 8" Glass-Composite, Downward-Firing
  • Frequency Response : 30 Hz - 200 Hz
  • Monitor Amplifier Power : 200W Peak, 100W RMS